EAGLE library for 16X2 and 20X4 LCDs

These are the parts that I have used for quite some time for all circuit boards I designed that have LCDs. Free for the grab but please check the dimension of your LCD before using them as some suppliers have smaller/larger mounting holes and not all LCDs have the holes at the same locations. Some parts have only 3 mounting holes since the bottom right corner of the LCD would be right above the GPS connector on phi-2 shields. The 16X2 LCD with connectors on bottom left have been used for some projects too.

Link: http://code.google.com/p/phi-prompt-user-interface-library/downloads/detail?name=HD44780LCD.lbr&can=2&q=#makechanges

4 Responses to EAGLE library for 16X2 and 20X4 LCDs

  1. CarlW says:

    Would add to try to use compatible fasteners. If the PCB has copper / brass holes; try to use nylon or brass fasteners. Many years ago, stainless fasteners were used in early solid state pinball games and galvanic corrosion caused mayhem… The 4×20 LCD I am using has copper surrounding the mounting holes.

  2. mw says:

    Thank you man!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 53 other followers

%d bloggers like this: